Inverters/Regulators

REG-12V 20Amp Solar Charger with LCD Display

Protect your valuable solar installation & maximise battery service life with our photovoltaic(PV)charge controller. This charger efficiently charges a vast selection of batteries from a wide range of solar panels.

REG-30Amp Solar charging Controller

SPECIFICATIONS

You make a substantial investment in a solar power setup, so make sure you look after your expensive batteries. With a charge controller, you have total control over battery charging and power usage. The LCD shows the system status and LED's at a glance showing the batteries charge status.

    * User-adjustable charging voltages
    * Suitable for wet or sealed lead-acid, lead calcium, lead antimony, Ni-Cd or Nife batteries
    * Pulse Width Modulation for optimum charging
    * 3-Stage, bulk, absorption, and float charge modes with status on LCD
    * Amp-hour input logging readouts in 3 sets, today and last 2 days
    * 5 state - LED indications of battery levels
    * Electronic overcharge protection and back current blocking to panel
    * Dusk to Dawn automatic on/off with 10 slectable on-off programs
    * Adjustable battery low voltage level disconnect and reconnect for DC output
    * Real time clock
    * System status display - Charge current / battery voltage and capacity
    * Overload and shirt circuit protection
    * Over voltage and reverse polarity protection

Dimension: 150mm W x 85mm D x 45mm H

SB 1700 SUNNY BOY INVERTER

Product Specifications
Recc. Maximum PV-power (PPV) approx. 2.050 Wp
Max. DC power (PDC,max) 1,850 W
Max. DC voltage (UDC,max) 400 V
PV-voltage range,MPPT (UPV)139 V – 400 V
Max. input current (IPV,max) 12.6A
DC voltage ripple (Upp) < 10 %
Max .number of strings (parallel)2
DC disconnection Snap cable connectors
Thermally monitored varistors yes
Ground fault monitoring yes
Reverse polarity protection Short circuit diode
Max. AC power (PAC,max)1,700 W
Nominal AC power (PAC,nom) 1,550 W
THD of grid current < 4%
Default range of AC voltage (UAC)198 V – 260 V
Possible range of AC voltage180 V – 265 V
AC frequency (fAC) 49.8 Hz – 50.2
Possible range of AC frequency 45.5 Hz – 54.5 Hz
Phase shift (cos phi) 1
Short circuit proof yes,current control
Connection to utility AC Plug
Max. Efficiency 93.5 %
Euro-efficiency 91.8 %
Enclosure accord.To DIN EN 60529 IP65
Mechanical data ( Width/height/depth in mm) 434/295/212
Weight approx.25 kg

SB2500 SUNNY BOY INVERTER

Product Specifications:
•Recc. Maximum PV-power (PPV) approx. 3,000 Wp
•Max. DC power (PDC,max)2,700 W
•Max. DC voltage (UDC,max) 600 V
•PV-voltage range,MPPT (UPV) 224 V – 400 V
•Max. input current (IPV,max)12 A
•DC voltage ripple (Upp) < 10 %
•Max .number of strings (parallel)3
•DC disconnection Snap cable connectors
•Thermally monitored varistors yes
•Ground fault monitoring yes
•Reverse polarity protection Short circuit diode
•Max. AC power (PAC,max) 2,500 W
•Nominal AC power (PAC,nom) 2,300 W
•THD of grid current < 4%
•Default range of AC voltage (UAC) 198 V – 260 V
•Possible range of AC voltage 180 V – 265 V
•AC frequency (fAC) 49.8 Hz – 50.2
•Possible range of AC frequency 45.5 Hz – 54.5 Hz
•Phase shift (cos phi) 1
•Short circuit proof yes,current control
•Connection to utility AC Plug
•Max. Efficiency 94
•Euro-efficiency 93
•Enclosure accord.To DIN EN 60529 IP65
•Mechanical data ( Width/height/depth in mm) 434/295/214
•Weight approx. 30kg

ZANTREX 2800 INVERTER

Flexible module selection and sizing due to wide PV input MPPT tracking voltage range
Lightweight and versatile mounting bracket
Easy access DC (photovoltaic) and AC (utility) terminal block simplifies wiring
Rugged NEMA 3R inverter enclosure allows reliable indoor and outdoor installations
Performance
Best-in-class efficiency to maximize solar system return on investment
Accurate MPPT tracking ensures maximum energy harvest under any conditions
FCC Part B compliance provides less external electronic interference
Serviceability
10-year standard warranty
Sealed inverter enclosure can be quickly separated from the wiring box